Upgrade NoticePrior to version 1.24.27, CodeMRI® Platform required a separate installation of Understand. Beginning with CodeMRI® Platform 1.24.27, this requirement has been lifted. You may uninstall Understand by removing the |
Create and or navigate to the directory in which CodeMRI® (CMRI) will be installed.
Verify there is enough storage to install CMRI and store the codebases to be analyzed.
System storage can be revealed by typing df -h
into the command line.
If there is enough storage in the desired location, proceed to the installation.
Navigate to CodeMRI.com and sign In. If this is a new account, click sign up. Navigate to your email client and validate the email. This email address will become the username for this account.
Navigate to the Downloads page https://codemri.com/installers/ and Download the CodeMRI Platform - Linux ZIP File.
The CMRI Platform download link is protected, so you can't copy & paste the link from CodeMRI.com into the CLI.
Use a system that can browse CodeMRI.com, navigate to the Downloads page and download the CodeMRI Platform - Linux zip file.
Either physically move the zip to your Linux partition or copy it to your Linux partition or virtual machine using the scp
commandscp -r -i ~/path/to/<CMRI Platform zip filename> REMOTE_USERNAME@IP_ADDRESS:~/REMOTE_PATH
Installation will fail if the install path contains any spaces. Please be sure to extract the installer into a path whose name contains no spaces. For example, /opt/cmri. If the installation path contains any spaces, the installation may fail or CodeMRI may fail to work properly. |
Navigate to the directory containing the CMRI Platform ZIP File & decompress the zip file using the command:$ unzip <CMRI Platform zip filename>
If no pre-existing unzip program exists on the system, run |
Run setup.sh in the new CMRI Platform folder with using the command:$ ./setup.sh
a. At this point the installation process will begin.
CMRI Versions prior to 1.24.50 will need to run the setup script with sudo. |
Read and type accept
to accept the license agreement.
Upon completion, the following message should be displayed:CodeMRI is now installed and configured. Please reload your shell or log out then back in.
You must log out and log in again to use CMRI.
CMRI should now be operational, start Command Prompt and run the command
Press |
|
|
Once you receive the license code from Silverthread support, enter the code as instructed in the reply and re-run job run produce_reports
.
Uninstall the existing CMRI Platform.
Install the new version, using the installation guide above
- Skip the process of creating a vault and logging in if there is an existing vault.